Removing wallpaper and prepping your walls for painting is not fun or quick. But with the right tips and techniques, you can do it yourself more efficiently without damaging your walls.

Start by scoring the wallpaper with a wallpaper scoring tool to reactivate and soften the adhesive. Then apply your solution using a sponge.

Prep the Walls

If you’re removing wallpaper to paint, it’s important to prep the wall before you start. You’ll need to wash off any dirt and cobwebs clinging to the surface, and you should also remove electrical outlet covers and switch plates. It’s a good idea to take this time to sweep the walls and vacuum them as well.

Then, if you don’t want to invest in a chemical wallpaper stripper, you can make your own using a 1:1 mixture of fabric softener and hot water in a spray bottle. Apply the solution to small, workable sections and let it soak in for a minute.

Now you can begin stripping the paper and the adhesive. The process can be messy, and it will likely test your patience as you peel and scrape, but don’t give up! By the end, you’ll have a clean surface ready for painting.

Prepare Your Tools

The trick to painting over wallpaper is preparing your tools. You’ll need a step ladder to reach the highest spots and a respirator mask to protect your lungs from any fumes. You also want to protect your floors with a dust sheet and a bucket of water for cleanup.

You’ll need to score the surface of your wallpaper with a wallpaper scoring tool or box cutter knife, so that the wall can absorb the liquid wallpaper remover or water. If you’re using a liquid remover, apply it with a pump sprayer or sponge according to the product’s instructions. For more info, do visit this website wallpaper singapore.

Carefully peel back the wallpaper, starting at a corner near the ceiling or under a switch plate. If it comes off easily, you’re ready to start the actual removal. If not, use a putty knife to carefully scrape the wallpaper, being careful not to gouge the wall surface. A few stray bits of wallpaper may remain, which is fine. Lightly sand those areas smooth before moving on.

Remove the Wallpaper

The process of removing wallpaper is messy and time-consuming, but it’s possible to do yourself if you plan carefully and take your time. Cover the floors and furniture with a tarp or drop cloth to protect them from paint chips, strips of wallpaper and dust. Remove switch plates and electrical outlet covers, too, since sanding may damage the wall underneath them. If you have to work from a ladder or step stool, put down plastic sheets to catch any drips. Wear a mask to prevent years of dirt and dust from entering your lungs as you strip the old wallpaper off your walls.

If your wallpaper isn’t too old and adhered well, you can paint over it if you’re willing to deal with the extra work involved. But be sure to read this article on painting over wallpaper first to ensure that you do it correctly. Using the wrong method could result in unsightly bubbles and wrinkles that will make it harder to remove in the future.

Clean the Walls

When you’re ready to start stripping wallpaper, make sure your work area is covered with a tarp or drop cloth and cover any furniture or art that cannot be moved. Also, put a plastic sheet or drop cloth over electrical outlets and switch plates to prevent dust from getting on them. It is also a good idea to wear a mask to protect yourself from wallpaper dust, which can be quite toxic.

When you’ve stripped the wallpaper, use a damp sponge to wipe down the walls. This will remove any remaining adhesive and leave the surface smooth for painting. If you’re concerned about the chemicals in commercial wallpaper remover, try making your own solution using a combination of warm water and trisodium phosphate (TSP). Add the TSP to a bucket of hot water and dip your sponge in the solution. Test the sponge on an inconspicuous spot to ensure your wall isn’t damaged. If it’s ok, start in a corner or seam and slowly strip the wallpaper down.